DESCRIPTION: Normal exterior emulsions cannot protect exterior walls from patches of sogginess, algae, and fungus caused by rain. Rubilux – Vivid ultra is especially formulated to give long lasting protection and beautiful looks with excellent colour retention for years to come.
Read more
DESCRIPTION: Normal exterior emulsions cannot protect exterior walls from patches of sogginess, algae, and fungus caused by rain. Rubilux – Vivid ultra is especially formulated to give long lasting protection and beautiful looks with excellent colour retention for years to come.
- Elastic Latex film covers hairline cracks
- Water resistant paint film protects from dampness
- Special paint preservatives fight algae and fungus
- Latex enriched formula gives a long lasting glow to your exterior walls
SURFACE PREPARATION:
Ensure surface is thoroughly clean, dry and free from all loose dirt, chalk, grease, fungi, algae and flaking paint. This can be achieved by brushing with a wire/ stiff coir brush, followed by water jetting if required. Fill up all minor cracks and defects with cement and sand mixture in the ratio 1:3. Avoid application of putty or filling compound while painting an exterior surface
PRIMING:
Application of putty is not recommended. In case of freshly plastered walls, apply one self priming coat or one coat of Rubilux Exterior cement Primer after thinning with water in the ratio of 1:1 by volume. For best performance self priming is recommended.
FINISHING:
Apply two coats of Rubilux-Vivid ultra for normal surfaces, with 3-5 hours between coats. 3 coats may be required in case of darker colours. For horizontal surface, minimum 3 coats is recommended for best performance
Back
